AquaProtect-Duo Technical Specifications

AquaProtect-Duo 10 or 20 inches

 

Technical Specifications - Hydraulic Pretreatment Module

A system that combines mechanical filtration, activated carbon adsorption, and lime stabilization without the addition of chemical reagents. And as an option at the point of use in the kitchen, the integration of a Water Bar with a tankless reverse osmosis system provides purified, energized, and mineralized water straight from the tap.

Key Benefits

- Dual mechanical filtration: Particulate load reduction + adsorption by activated carbon of chlorine, organic compounds, PFAS, etc. 

- Active protection against scale and clogs in the plumbing system

- Improved thermal efficiency, enhanced comfort, protection of the system, and reduced impact of scale buildup on household appliances, while maintaining the performance of the final treatment at the point of use. Comfort in common areas.

- Easy installation, no electricity required
  • RING: Service life of more than 20 years

 

 

 

 

 

 

 

 

 

 

 

Hydraulic Specifications

 

Parameter

Approximate value

Nominal flow rate

1 to 3 m³/h, depending on the configuration

Maximum flow rate

up to 5 m³/h

Operating pressure

2 to 3 bar

Maximum pressure

8 bar

Water Temperature

5 to 50°C

Connection

3/4" to 1" (depending on model)

 

 

 

Pressure drop

 

AquaProtect-Duo 10" × 2.5" sediment + block carbon: approximately 0.3 to 0.4 bar at 7.6 L/min.
AquaProtect-Duo 20" × 2.5" sediment + block carbon: approximately 0.25 to 0.35 bar at 7.6 L/min, and 0.55 to 0.75 bar at 15 L/min.

 

Technology

 

Level 1 - Sediment Filtration: Removes particles, sludge, sand, and rust.

Level 2 - Activated carbon block: Reduces chlorine, odors, and organic compounds.

Level 3 - RING Anti-Scale Module

Calcium carbonate stabilization; reduction of scale, corrosion, and sludge.

Maintenance

 

Filter cartridges: Replacement is recommended every 6 to 12 months, depending on water quality and usage.

RING: No special maintenance required

Recommended Installation on a Bypass

The bypass makes it easier to replace filters without interrupting the main water supply

Installation - Keep out of the freeze and out of direct sunlight. Install a pressure regulator upstream if necessary

Point-of-Use Integration: Reverse Osmosis System

The Osmodyn water osmosis system without a storage tank, featuring the "    " option for fresh and sparkling water (  ), is installed downstream of the AquaProtect-Duo at the point of use to produce drinking water with a high level of purification. This configuration supplies the point of use with water that is: - purified - energized – mineralized, and optionally chilled and carbonated

Applications

  • Residential Installation
  • HVAC Systems
  • Heat Exchangers
  •  Tertiary Networks
  • Industrial and Hospital Networks