On-tap filter: micro-filtration on the move
Filtration performance
Compact extruded activated carbon filter
- Retention of organic substances and particles generating odors and bad tastes.
- Retention/reduction of chlorine and organochlorine compounds in water.
- Reduction of organic compounds, trihalomethanes, COD* and VOC*.
- Retention of suspended particles larger than 5 microns.
* COD: "Chemical Oxygen Demand" varies according to the content of persistent pollutants, particularly pesticides.
* VOC: "Volatile Organic Compounds" are groups of hydrocarbons that evaporate at low temperatures, such as petroleum derivatives or halogenated organic compounds containing chlorine, fluorine, iodine, etc.
Flow & pressure
- High flow rate: 1 to 3 liters/minute
- Minimum pressure required: 0.1 bar
- Maximum operating pressure: 0.4 bar
Comfort of use
3 setting positions: 2 jet positions for unfiltered water (hand shower and standard) and one standard jet position for filtered water.
Operating conditions
- Operating pressure: 1 to 4 bar
- Operating temperature: 5 to 38°C
- Max. filter life 3000 liters
Quick and easy to install
Fittings supplied for all tap threads.
5 connection adapters supplied (M24 external thread with 1.0 mm screw thread + M22 internal thread with 1.0 mm screw thread + M23 external thread with 1.25 mm screw thread + M22 internal thread with 1.25 mm screw thread + Multi-purpose adapter).
Installation
- Unscrew the jetbreaker from your faucet
- Insert the appropriate M / F adapter
- Fit corresponding gasket
- Insert cartridge into filter
- Clip filter onto faucet
Advice on 1st use of the filter
Rinse for 1 minute. You can recycle these first liters of water, blackened by carbon dust, to water your plants.
In normal use, rinse the filter for about 10 seconds.
In case of absence, rinse the filter for about 1 minute.
Dimensions & accessories
- Net weight: approx. 200 g
- Dimensions: length 140 × width 60 × height 100
- Accessories included: 5 adapters, installation key, gaskets