Mini Osmobac membrane disinfection RO system

Mini Osmobac - Disinfection of reverse osmosis membranes

Mini Osmobac is a product specially designed for disinfecting reverse osmosis (RO) membranes. Suitable for preventive maintenance or after a long period of inactivity, it prevents bacterial proliferation and keeps your membranes clean and efficient.

Key features

Benefits

• Maintains membrane longevity and efficiency
• Prevents the formation of biofilm and bacteria
• Compatible with domestic and professional RO systems
• Easy to use with dedicated disinfection housing
• Easy to use

1. Preparation: remove upstream and downstream filters, renew if necessary. Disconnect the osmosis unit and turn off the water supply.
2. Disinfection: open the water supply and the tap so that the osmosis unit sucks in the solution. Repeat the operation a second time.
3. Reserve tank: for osmosis units with a tank, fill the tank with diluted solution and leave for 15 minutes, then drain 3 to 4 times.

Instructions for use

• Use only with drinking water that complies with current standards.
• To protect the membrane, do not exceed 15 minutes contact time.
• Disinfect regularly to keep your reverse osmosis unit in perfect condition.

For industrial reverse osmosis systems

Use the existing cleaning station. Make sure that the protective filters cannot be drowned in the disinfectant solution.
Circulate the diluted solution through the osmosis unit. Leave for 15 min.
Drain the system 2 or 3 times.
Put the osmosis unit back into service.

Technical specifications

Precautions

- Wear gloves and goggles
- Keep out of reach of children
- Do not ingest

If in doubt about use, consult us

• Type: Sachet of activated oxygen granules for TFC membranes
• Action: Powerful oxidizer, kills bacteria and biofilms on membranes
• Disinfection container: 3/8" quick connector, with optional reducing sleeve for 1/4" tubes
• Use: Preventive or after prolonged non-use of the osmosis plant
• Connection: connect the disinfection housing between the water inlet and the osmosis unit.
• Adding the product: pour the granules into the housing, fill with water, close and shake to homogenize.
• Contact time: leave to act for a maximum of 15 minutes.
• Rinse: reconnect the osmosis unit and circulate water for at least 5 minutes to remove any residue.
• Faucet: disinfect spout with diluted solution.

Sachet: 50 g - Appearance: Granules

Standards: AFNOR - NFT72-171 - NF EN 1275 - NF EN 1040