Osmobac - Housing 10" filter rinsing and disinfection kit

Key features

Type: Rinsing and disinfection kit for 10" filters

Action:

Rinsing of carbon filters before commissioning

Disinfection of TFC reverse osmosis membranes

Prevents bacterial growth in the system

Scope of supply: Tap fittings, flexible tubing, disinfection housing

Compatibility: RO units and 10" filter holders

Benefits

• Eliminates carbon dust that could clog membranes RO
• Protects membranes RO and prolongs their service life
• Easy to install and use
• Effective prevention of biofilms and bacteria

Easy to use

Rinsing the carbon filter

1. Remove the aerator from the tap and connect the Osmobac kit to the tap and filter holder inlet.
2. Soften the tube in hot water to position it correctly.
3. Place the carbon filter in the housing and screw the head back on.
4. Gradually turn on the cold water and let it run for 1 minute, shaking the filter slightly.
5. As soon as the water runs clear, stop rinsing and return the filter to the osmosis unit.

Disinfection of membranes RO

1. Remove the other filters to allow disinfection of the filter holders.
2. Place the Osmobac granules in the kit housing, fill to 2/3 full and screw the head back on.
3. Turn the kit upside down to visualize disinfectant diffusion.
4. Slightly open the water inlet to circulate the disinfectant throughout the system.
5. Turn off the water and leave for 30 minutes.
6. Rinse thoroughly for at least 3 minutes before replacing filters.

Instructions for use

Wear disposable gloves and observe hygiene precautions when handling.

Use drinking water that complies with current standards.

Repeat the operation regularly to maintain the osmosis unit in perfect condition.